Description
It is mainly used for glass handling equipment, used in glass production and processing, glass curtain wall, construction site engineering glass installation, etc. The glass installation machine is suitable for handling insulating glass, tempered glass, glass curtain wall, glass transfer in the glass deep processing workshop, etc. The use of glass trucks for glass handling can not only greatly reduce the injury rate in glass building installation projects, but also improve the production efficiency in the process of material handling and installation, and save labor costs.
Benefits & Advantages
300mm suction cups
Imported silica gel suction cups are used, and the suction cups have three layers of sealing rings. The sealing performance is good, the material is soft, environmentally friendly and odorless, easy to clean, and has a long service life. It is suitable for glass curtain wall installation and glass deep processing and handling industries. And also, The high wear-resistant nitrile rubber suction cup is optional.
Adopts a dual control system
It adopts a dual control system of manual rocker and numerical control button handle, equipped with an air pressure gauge imported from Japan, and an air pressure pump imported from Europe, with stable quality and high safety performance.
Adopts a dual control system
The design of the remote control handle
The design of the remote control handle is humanized and suitable for a variety of workplaces
The wear-resistant outdoor drive wheels
Wear-resistant outdoor drive wheels, high-power motor, powerful power, solid wear-resistant front wheels, suitable for various occasions and outdoor operations
The design of multi-layer rocker
The multi-layer rocker design is used to facilitate the electric flipping of the glass panel
The design of side support legs
The design of side support legs can better maintain the stability of the body and ensure the safety of use
DIgital display
The negative pressure vacuum air circuit is adopted, and the negative pressure digital display is displayed. Compared with the traditional instrument display, the sensitivity is improved and the display is more accurate and intuitive, ensuring glass suction to a certain extent.
And with insufficient pressure alarm and automatic supplementary negative pressure, digital display vacuum pressure, and battery power gauge, you can monitor the operation of the equipment more clearly Ultra-high sensitivity, including a pinhole 1/10 the size of the leak can be on the digital display.
Intuitive display
The digital display is built into the operating electric cabinet, which can better protect the equipment from the impact of the harsh engineering environment and the damage caused by accidents. It is suitable for outdoor construction and installation of engineering glass.
Equipment performance
The frame is made of national standard materials, and the suction cup has high-temperature resistance and strong suction. It has high adsorption force when it touches a smooth surface and is easy to operate.
The Using Instructions
1. The glass suction cup lifts and starts
Turn on the power switch on the control box, start the vacuum pump, and first evacuate the air in the accumulator to ensure sufficient vacuum, when the pressure is lower than 50%, the sound and light alarm lamp will alarm until the required vacuum pressure is reached. When the pressure reaches the set pressure, the vacuum pump will automatically stop running to save power. At this point, the vacuum lifter is in a ready state.
2. Glass suction cup positioning
Control the movement of the lifting equipment so that the suction cup of the suction hoist is close to the glass surface. At this time, the suction cup of the suction hoist is fully fitted and sealed with the glass surface;
3. Glass adsorption
Push the manual hand slide valve on the operating handle. At this time, the suction cup is connected to the vacuum system, and the suction hoist automatically absorbs the glass. The vacuum pressure gauge will display the vacuum degree (pressure) at this time. When the pressure gauge shows that the vacuum degree reaches 55%. (-0.55kg/f), it means that it can be transported, and this process takes about 2-3 seconds;
4. Glass flipping:
Pull out the locking shaft pin, and push the suction cup holder hard, so that it can drive the workpiece to turn upwards until it reaches the position of about 90 degrees, the shaft pin will automatically lock the suction cup holder, and at this time, the workpiece can be turned 90 degrees vertically.
Main Technical Parameter
| Item. | Spec. |
| Power | 0.37KW (50Hz) |
| Vacuum pressure | -0.05～-0.08Mpa |
| Power-off holding time | ≥20min |
| Vacuum pressure dropped from | -0.08 Mpa to -0.045 Mpa |
| Suction lift Z small glass size | 600 mm * 800 mm |
| Suction glass size | 4000 mm * 6000 mm |
| The number of suction cups | Could 4 cups to 12 cups |
| Suction weight | 300kg |
| Glass installation robot | LJXPC | ||||
| Load capacity（kg） | 300 | 350 | 400 | 500 | 600 |
| Manual rotating（°） | 360 | 360 | 360 | 360 | 360 |
| Lifting height（mm） | 3500 | 3500 | 3500 | 3500 | 3500 |
| Manipulation | Walkie Type | ||||
| Battery（V/A） | 2*12/80 | 2*12/90 | 2*12/100 | 2*12/120 | 2*12/120 |
| Charger（V/A） | 24/12 | 24/12 | 24/15 | 24/18 | 24/18 |
| Drive motor（V/W） | 24/1200 | 24/1200 | 24/1200 | 24/1500 | 24/1500 |
| Lift motor（V/W） | 24/2000 | 24/2000 | 24/2000 | 24/2200 | 24/2200 |
| Overall width（mm） | 810 | 810 | 810 | 810 | 810 |
| Overall length（mm） | 2660 | 2660 | 2660 | 2800 | 2800 |
| Driving wheel dimension（mm） | 250*80 | 250*80 | 250*80 | 300*100 | 300*100 |
| Pads diameter（mm） | 300 | 300 | 300 | 300 | 300 |
| Glass size（mm） | 3660*2440 | 3660*2440 | 3660*2440 | 3660*2440 | 3660*2440 |
Reviews
There are no reviews yet.